Revision 10/24/2017      

CONCRETE 602-P
Language: English



Thermbond Concrete is a rapid setting high early strength concrete with easy and accurate mixing, controlled setting, and higher strengths. Thermbond Concrete resists freeze-thaw cycling, inhibits rusting, and chemically bonds to concretes for permanent repairs.

CHARACTERISTICS - Silica - Medium Weight - Fast Setting - Fine Grain - Alumina


 

PACKAGING

Unit Equivalent Bags:2 Jug:1
Bag Weight* 36 lbs 16.3 kg
Jug Weight* 11 lbs 5.0 kg
Drum Weight 500 lbs 226.8 kg
Unit Weight* 83 lbs 37.6 kg
Yield / Unit* 0.54 ft3 0.015 m3
Units / Ton* 24.15 short 26.63 metric
Board Feet / Unit* 6.5 bd ft
Wet to Dry Ratio* Contact us for details
Liquid Activator CONCRETE
Bags Per Pallet 48
Drums Per Dry Pallet 0.5
 

COMPRESSIVE STRENGTH**

3 Hours 3000 psi 211 kg/cm2 20.7 N/mm2
6 Hours 6000 psi 422 kg/cm2 41.4 N/mm2
3 Days 9000 psi 633 kg/cm2 62.1 N/mm2
 

CHEMICAL ANALYSIS (After 1500F (816C))**

  • Al2O3
  • SiO2
  • Fe2O3
  • P2O5
  • Other
  • Total
  • 59.00 %
  • 29.00 %
  • 0.70 %
  • 5.00 %
  • 6.30 %
  • 100.00 %
 

APPLICATION***

Data based on
  • Troweling
Alternative Method***
  • Hand Packing
 

BULK DENSITY**

As Placed 154 lbs/ft3 2467 kg/m3
After Setting 145 lbs/ft3 2323 kg/m3
 

PERMANENT LINEAR CHANGE**

On Set -0.10%
 

THERMAL CONDUCTIVITY**

300F (149C) 8.0 Btu-in/hr-ft2-F 1.15 W/m K
650F (343C) 7.5 Btu-in/hr-ft2-F 1.08 W/m K
1000F (538C) 7.8 Btu-in/hr-ft2-F 1.12 W/m K
**Test data shown are based on averages subject to normal variation on individual tests, and therefore should not be assumed to be maximum or minimum specifications.
***Application by alternative method may produce somewhat different results.
Measures are approximate and may vary. For mixing partial units, contact Stellar Materials for specific wet-to-dry ratios. See Installation Guide for more detailed information.
To assure you are getting the latest data, see our online data sheets at tds.thermbond.com.
Due to the unique nature of the Stellar binder system, test procedures vary slightly from ASTM.
Documentation of these variations is available upon request.
Thermbond is a registered trademark of Stellar Materials Incorporated. All rights reserved.