Revision 05/16/2017      

FORMULA 2120-L
Language: English



Thermbond Refractories use the patented Stellar Binder Systemâ„¢ for easy and accurate mixing, controlled setting, fast dry-out and heat up, thermal shock resistance and other unique properties. Thermbond chemically bonds to existing fired refractories.

CHARACTERISTICS - Very Dense - Non-Wetting - Fast Curing - Longer Working Time - Fast Setting - High Purity - High Alumina - Abrasion Resistant

PRELIMINARY DATA
 

PACKAGING

Unit Equivalent Bags:1 Jug:1
Bag Weight* 74 lbs 33.6 kg
Jug Weight* 8 lbs 3.6 kg
Drum Weight 400 lbs 181.4 kg
Unit Weight* 82 lbs 37.2 kg
Yield / Unit* 0.43 ft3 0.012 m3
Units / Ton* 24.29 short 26.77 metric
Wet to Dry Ratio* Contact us for details
Liquid Activator FORMULA
Bags Per Pallet 48
Drums Per Dry Pallet 1
 

COMPRESSIVE STRENGTH**

1500F (816C) 10000 psi 703 kg/cm2 68.9 N/mm2
2700F (1482C) 16000 psi 1125 kg/cm2 110.3 N/mm2
 

CHEMICAL ANALYSIS (After 1500F (816C))**

  • Al2O3
  • SiO2
  • Fe2O3
  • P2O5
  • Other
  • Total
  • 87.00 %
  • 2.00 %
  • 0.80 %
  • 4.00 %
  • 6.20 %
  • 100.00 %
 

COLD MODULUS OF RUPTURE**

1500F (816C) 1600 psi 112 kg/cm2 11 N/mm2
2700F (1482C) 2000 psi 141 kg/cm2 14 N/mm2
 

ABRASION RESISTANCE** (ASTM C-704)

After 1500F (816C) <6 cc loss
 

HOT MODULUS OF RUPTURE**

1500F (816C) 1200 psi 84 kg/cm2 8 N/mm2
 

APPLICATION

Data based on
  • Casting
 

BULK DENSITY**

As Placed 190 lbs/ft3 3044 kg/m3
After 1500F (816C) 180 lbs/ft3 2883 kg/m3
 

PERMANENT LINEAR CHANGE**

1500F (816C) -0.20%
2700F (1482C) -0.90%
 

THERMAL CONDUCTIVITY**

600F (316C) 16.9 Btu-in/hr-ft2-F 2.43 W/m K
1000F (538C) 15.0 Btu-in/hr-ft2-F 2.16 W/m K
1200F (649C) 14.3 Btu-in/hr-ft2-F 2.06 W/m K
1800F (982C) 13.5 Btu-in/hr-ft2-F 1.95 W/m K
 

MOLTEN METAL CONTACT

Iron,Steel
**Test data shown are based on averages subject to normal variation on individual tests, and therefore should not be assumed to be maximum or minimum specifications.
***Application by alternative method may produce somewhat different results.
Measures are approximate and may vary. For mixing partial units, contact Stellar Materials for specific wet-to-dry ratios. See Installation Guide for more detailed information.
To assure you are getting the latest data, see our online data sheets at tds.thermbond.com.
Due to the unique nature of the Stellar binder system, test procedures vary slightly from ASTM.
Documentation of these variations is available upon request.
Thermbond is a registered trademark of Stellar Materials Incorporated. All rights reserved.