Revision 11/02/2017      

FORMULA 16-G
Language: English



Thermbond Refractories use the patented Stellar Binder Systemâ„¢ for easy and accurate mixing, controlled setting, fast dry-out and heat up, thermal shock resistance and other unique properties. Thermbond chemically bonds to existing fired refractories.

CHARACTERISTICS - Non-Wetting - Medium Weight - Fast Curing - Fast Setting - High Purity - Fused Silica


 

PACKAGING

Bag Weight* 43 lbs 19.5 kg
Jug Weight* 8 lbs 3.6 kg
Drum Weight 400 lbs 181.4 kg
Unit Weight* 51 lbs 23.2 kg
Yield / Unit* 0.43 ft3 0.012 m3
Units / Ton* 39.09 short 43.09 metric
Wet to Dry Ratio* Contact us for details
Liquid Activator FORMULA
Bags Per Pallet 48
Drums Per Dry Pallet 1(plus predampening 1 jug to 4 bags)*
 

COMPRESSIVE STRENGTH**

1500F (816C) 2500 psi 176 kg/cm2 17.2 N/mm2
2500F (1371C) 3000 psi 211 kg/cm2 20.7 N/mm2
2600F (1427C) 3500 psi 246 kg/cm2 24.1 N/mm2
 

CHEMICAL ANALYSIS (After 1500F (816C))**

  • Al2O3
  • SiO2
  • Fe2O3
  • P2O5
  • Other
  • Total
  • 9.00 %
  • 82.00 %
  • 0.10 %
  • 7.00 %
  • 1.90 %
  • 100.00 %
 

COLD MODULUS OF RUPTURE**

1500F (816C) 650 psi 46 kg/cm2 4.5 N/mm2
2500F (1371C) 750 psi 53 kg/cm2 5 N/mm2
2600F (1427C) 850 psi 60 kg/cm2 6 N/mm2
 

HOT MODULUS OF RUPTURE**

1500F (816C) 1500 psi 105 kg/cm2 10 N/mm2
 

APPLICATION***

Data based on
  • Gunning
Alternative Method***
  • Casting
 

BULK DENSITY**

As Placed 120 lbs/ft3 1922 kg/m3
After 1500F (816C) 110 lbs/ft3 1762 kg/m3
 

PERMANENT LINEAR CHANGE**

1500F (816C) -0.30%
2500F (1371C) -0.50%
2600F (1427C) -0.70%
 

THERMAL CONDUCTIVITY**

600F (316C) 3.3 Btu-in/hr-ft2-F 0.48 W/m K
1000F (538C) 3.5 Btu-in/hr-ft2-F 0.50 W/m K
1500F (816C) 3.6 Btu-in/hr-ft2-F 0.52 W/m K
2000F (1093C) 4.0 Btu-in/hr-ft2-F 0.58 W/m K
 

MOLTEN METAL CONTACT

Aluminum,Zinc
**Test data shown are based on averages subject to normal variation on individual tests, and therefore should not be assumed to be maximum or minimum specifications.
***Application by alternative method may produce somewhat different results.
Measures are approximate and may vary. For mixing partial units, contact Stellar Materials for specific wet-to-dry ratios. See Installation Guide for more detailed information.
To assure you are getting the latest data, see our online data sheets at tds.thermbond.com.
Due to the unique nature of the Stellar binder system, test procedures vary slightly from ASTM.
Documentation of these variations is available upon request.
Thermbond is a registered trademark of Stellar Materials Incorporated. All rights reserved.