Revision 10/27/2019      

FORMULA 6-L
Language: English



Thermbond Refractories use the patented Stellar Binder Systemâ„¢ for easy and accurate mixing, controlled setting, fast dry-out and heat up, thermal shock resistance and other unique properties. Thermbond chemically bonds to existing fired refractories.

CHARACTERISTICS - Silica - Non-Wetting - Mullite - Fast Curing - Longer Working Time - Fast Setting - Dense


 

PACKAGING

Unit Equivalent Bags:1 Jug:1
Bag Weight* 65 lbs 29.5 kg
Jug Weight* 8 lbs 3.6 kg
Drum Weight 400 lbs 181.4 kg
Unit Weight* 73 lbs 33.2 kg
Yield / Unit* 0.48 ft3 0.013 m3
Units / Ton* 27.34 short 30.13 metric
Wet to Dry Ratio* Contact us for details
Liquid Activator FORMULA
Bags Per Pallet 48
Drums Per Dry Pallet 1
 

COMPRESSIVE STRENGTH**

1500F (816C) 3000 psi 211 kg/cm2 20.7 N/mm2
2000F (1093C) 4800 psi 337 kg/cm2 33.1 N/mm2
2500F (1371C) 4000 psi 281 kg/cm2 27.6 N/mm2
 

CHEMICAL ANALYSIS (After 1500F (816C))**

  • Al2O3
  • SiO2
  • Fe2O3
  • P2O5
  • Other
  • Total
  • 65.00 %
  • 26.00 %
  • 0.90 %
  • 5.00 %
  • 3.10 %
  • 100.00 %
 

COLD MODULUS OF RUPTURE**

1500F (816C) 900 psi 63 kg/cm2 6.2 N/mm2
2400F (1316C) 1450 psi 102 kg/cm2 10 N/mm2
2500F (1371C) 1350 psi 95 kg/cm2 9 N/mm2
 

HOT MODULUS OF RUPTURE**

1500F (816C) 1850 psi 130 kg/cm2 13 N/mm2
 

APPLICATION

Data based on
  • Casting
 

BULK DENSITY**

As Placed 154 lbs/ft3 2467 kg/m3
After 1500F (816C) 147 lbs/ft3 2355 kg/m3
 

PERMANENT LINEAR CHANGE**

1500F (816C) -0.34%
2000F (1093C) -0.40%
2500F (1371C) -0.30%
 

THERMAL CONDUCTIVITY**

600F (316C) 10.3 Btu-in/hr-ft2-F 1.48 W/m K
1000F (538C) 10.0 Btu-in/hr-ft2-F 1.44 W/m K
1200F (649C) 9.9 Btu-in/hr-ft2-F 1.43 W/m K
1800F (982C) 10.0 Btu-in/hr-ft2-F 1.44 W/m K
 

MOLTEN METAL CONTACT

Aluminum,Zinc,Iron
**Test data shown are based on averages subject to normal variation on individual tests, and therefore should not be assumed to be maximum or minimum specifications.
***Application by alternative method may produce somewhat different results.
Measures are approximate and may vary. For mixing partial units, contact Stellar Materials for specific wet-to-dry ratios. See Installation Guide for more detailed information.
To assure you are getting the latest data, see our online data sheets at tds.thermbond.com.
Due to the unique nature of the Stellar binder system, test procedures vary slightly from ASTM.
Documentation of these variations is available upon request.
Thermbond is a registered trademark of Stellar Materials Incorporated. All rights reserved.