Revision 11/02/2017      

FORMULA 5-L
Language: English



Thermbond Refractories use the patented Stellar Binder Systemâ„¢ for easy and accurate mixing, controlled setting, fast dry-out and heat up, thermal shock resistance and other unique properties. Thermbond chemically bonds to existing fired refractories.

CHARACTERISTICS - Very Dense - Non-Wetting - Fast Curing - Longer Working Time - Fast Setting - High Alumina - Abrasion Resistant


 

PACKAGING

Unit Equivalent Bags:1 Jug:1
Bag Weight* 65 lbs 29.5 kg
Jug Weight* 8 lbs 3.6 kg
Drum Weight 400 lbs 181.4 kg
Unit Weight* 73 lbs 33.2 kg
Yield / Unit* 0.42 ft3 0.012 m3
Units / Ton* 27.34 short 30.13 metric
Wet to Dry Ratio* Contact us for details
Liquid Activator FORMULA
Bags Per Pallet 48
Drums Per Dry Pallet 1
 

COMPRESSIVE STRENGTH**

1500F (816C) 7500 psi 527 kg/cm2 51.7 N/mm2
2500F (1371C) 6000 psi 422 kg/cm2 41.4 N/mm2
2800F (1538C) 10000 psi 703 kg/cm2 68.9 N/mm2
 

CHEMICAL ANALYSIS (After 1500F (816C))**

  • Al2O3
  • SiO2
  • Fe2O3
  • P2O5
  • Other
  • Total
  • 88.50 %
  • 2.00 %
  • 0.99 %
  • 4.50 %
  • 4.01 %
  • 100.00 %
 

COLD MODULUS OF RUPTURE**

1500F (816C) 1750 psi 123 kg/cm2 12.1 N/mm2
2500F (1371C) 1600 psi 112 kg/cm2 11 N/mm2
2800F (1538C) 2650 psi 186 kg/cm2 18 N/mm2
 

ABRASION RESISTANCE** (ASTM C-704)

After 1500F (816C) <11 cc loss
 

HOT MODULUS OF RUPTURE**

1500F (816C) 2350 psi 165 kg/cm2 16 N/mm2
 

APPLICATION

Data based on
  • Casting
 

BULK DENSITY**

As Placed 175 lbs/ft3 2803 kg/m3
After 1500F (816C) 165 lbs/ft3 2643 kg/m3
 

PERMANENT LINEAR CHANGE**

1500F (816C) -0.18%
2500F (1371C) -0.94%
2800F (1538C) -1.31%
 

THERMAL CONDUCTIVITY**

600F (316C) 14.8 Btu-in/hr-ft2-F 2.14 W/m K
1000F (538C) 13.5 Btu-in/hr-ft2-F 1.95 W/m K
1200F (649C) 12.7 Btu-in/hr-ft2-F 1.83 W/m K
1800F (982C) 12.1 Btu-in/hr-ft2-F 1.75 W/m K
 

MOLTEN METAL CONTACT

Aluminum,Zinc
**Test data shown are based on averages subject to normal variation on individual tests, and therefore should not be assumed to be maximum or minimum specifications.
***Application by alternative method may produce somewhat different results.
Measures are approximate and may vary. For mixing partial units, contact Stellar Materials for specific wet-to-dry ratios. See Installation Guide for more detailed information.
To assure you are getting the latest data, see our online data sheets at tds.thermbond.com.
Due to the unique nature of the Stellar binder system, test procedures vary slightly from ASTM.
Documentation of these variations is available upon request.
Thermbond is a registered trademark of Stellar Materials Incorporated. All rights reserved.