Revision 04/18/2019      

FORMULA 2106-G
Language: English



Thermbond Refractories use the patented Stellar Binder Systemâ„¢ for easy and accurate mixing, controlled setting, fast dry-out and heat up, thermal shock resistance and other unique properties. Thermbond chemically bonds to existing fired refractories.

CHARACTERISTICS - Non-Wetting - Mullite - Fast Curing - Fast Setting - Abrasion Resistant - Dense - Gunning Grade


 

PACKAGING

Bag Weight* 65 lbs 29.5 kg
Jug Weight* 8 lbs 3.6 kg
Drum Weight 400 lbs 181.4 kg
Unit Weight* 73 lbs 33.1 kg
Yield / Unit* 0.46 ft3 0.013 m3
Units / Ton* 27.40 short 30.20 metric
Wet to Dry Ratio* Contact us for details
Liquid Activator FORMULA
Bags Per Pallet 48
Drums Per Dry Pallet 1(plus predampen 1 jug to 4 bags)*
 

COMPRESSIVE STRENGTH**

1500F (816C) 8000 psi 562 kg/cm2 55.2 N/mm2
2500F (1371C) 8000 psi 562 kg/cm2 55.2 N/mm2
 

CHEMICAL ANALYSIS (After 1500F (816C))**

  • Al2O3
  • SiO2
  • Fe2O3
  • P2O5
  • Other
  • Total
  • 64.00 %
  • 25.00 %
  • 0.90 %
  • 6.00 %
  • 4.10 %
  • 100.00 %
 

COLD MODULUS OF RUPTURE**

1500F (816C) 1500 psi 105 kg/cm2 10.3 N/mm2
2500F (1371C) 1500 psi 105 kg/cm2 10 N/mm2
 

ABRASION RESISTANCE** (ASTM C-704)

After 1500F (816C) < 10 cc loss
 

APPLICATION

Data based on
  • Gunning
 

BULK DENSITY**

As Placed 158 lbs/ft3 2531 kg/m3
After 1500F (816C) 152 lbs/ft3 2435 kg/m3
 

PERMANENT LINEAR CHANGE**

1500F (816C) -0.20%
 

THERMAL CONDUCTIVITY**

600F (316C) 10.3 Btu-in/hr-ft2-F 1.49 W/m K
1000F (538C) 10.0 Btu-in/hr-ft2-F 1.44 W/m K
1200F (649C) 9.9 Btu-in/hr-ft2-F 1.43 W/m K
1800F (982C) 10.0 Btu-in/hr-ft2-F 1.44 W/m K
 

MOLTEN METAL CONTACT

Aluminum,Zinc,Iron
**Test data shown are based on averages subject to normal variation on individual tests, and therefore should not be assumed to be maximum or minimum specifications.
***Application by alternative method may produce somewhat different results.
Measures are approximate and may vary. For mixing partial units, contact Stellar Materials for specific wet-to-dry ratios. See Installation Guide for more detailed information.
To assure you are getting the latest data, see our online data sheets at tds.thermbond.com.
Due to the unique nature of the Stellar binder system, test procedures vary slightly from ASTM.
Documentation of these variations is available upon request.
Thermbond is a registered trademark of Stellar Materials Incorporated. All rights reserved.