Revision 06/20/2017      

CONCRETE 602-R
Language: English



Thermbond Concrete is a rapid setting high early strength concrete with easy and accurate mixing, controlled setting, and higher strengths. Thermbond Concrete resists freeze-thaw cycling, inhibits rusting, and chemically bonds to concretes for permanent repairs.

CHARACTERISTICS - Silica - Mullite - Medium Weight - Fast Setting - Fine Grain

PRELIMINARY DATA
 

PACKAGING

Unit Equivalent Bags:2 Jug:1
Bag Weight* 57 lbs 25.9 kg
Jug Weight* 11 lbs 5.0 kg
Drum Weight 500 lbs 226.8 kg
Unit Weight* 125 lbs 56.6 kg
Yield / Unit* 0.78 ft3 0.022 m3
Units / Ton* 16.02 short 17.66 metric
Board Feet / Unit* 9.4 bd ft
Wet to Dry Ratio* Contact us for details
Liquid Activator CONCRETE
Bags Per Pallet 48
Drums Per Dry Pallet 1
 

COMPRESSIVE STRENGTH**

230F (110C) 10000 psi 703 kg/cm2 68.9 N/mm2
 

CHEMICAL ANALYSIS (After 1500F (816C))**

  • Al2O3
  • SiO2
  • Fe2O3
  • P2O5
  • Other
  • Total
  • 73.00 %
  • 16.00 %
  • 1.00 %
  • 3.00 %
  • 7.00 %
  • 100.00 %
 

ABRASION RESISTANCE** (ASTM C-704)

After Setting <5 cc loss
 

APPLICATION

Data based on
  • Ramming
 

BULK DENSITY**

As Placed 160 lbs/ft3 2563 kg/m3
After 1500F (816C) 150 lbs/ft3 2403 kg/m3
 

PERMANENT LINEAR CHANGE**

On Set 0.30%
60 Days 0.05%
**Test data shown are based on averages subject to normal variation on individual tests, and therefore should not be assumed to be maximum or minimum specifications.
***Application by alternative method may produce somewhat different results.
Measures are approximate and may vary. For mixing partial units, contact Stellar Materials for specific wet-to-dry ratios. See Installation Guide for more detailed information.
To assure you are getting the latest data, see our online data sheets at tds.thermbond.com.
Due to the unique nature of the Stellar binder system, test procedures vary slightly from ASTM.
Documentation of these variations is available upon request.
Thermbond is a registered trademark of Stellar Materials Incorporated. All rights reserved.